
Professional Japanese chef's knives
Gyuto, santoku, nakiri, petty, yanagiba and deba. Single and double bevel, carbon and stainless, sharpened to the maker's geometry without rounding the shinogi line.
A specialist call-out sharpening service for chefs, home cooks, butchers, woodworkers and bushcrafters. Every knife's original angle is measured with a digital angle finder, then sharpened on water-cooled Japanese stone wheels, finished on diamond-loaded leather and tested shaving sharp before they go back in your hand.
I'm Stevie, the sharpener behind Nismo. I sharpen knives and edged tools on specialist precision machinery, finish every edge by hand, and bring the whole kit to you.
A good knife deserves better than a pull-through sharpener or a dry grinding wheel that overheats the steel. Most of my work is done on specialist machines: a water-cooled disc system with Japanese abrasive stone wheels, a belt grinder running the very best 3M abrasives and a fixed desktop system for smaller and specialist knives. Each knife's original angle is measured with a high-accuracy digital angle finder, and the cutting edge is set on site with a precision angle guide, so every blade keeps its original geometry.
Every edge is then finished on leather loaded with diamond compound, for a true shaving edge. For the blades that call for it, I still sharpen by hand on traditional Japanese whetstones.
Whether it's a hand-forged gyuto from Sakai, the family carving knife, a busy butcher's boning knives or a set of bench chisels, each one gets the same care. I explain what I'm doing, show you the edge and return every blade cleaned, sharp and safe to handle.
Stevie McGarrigleFounder, Nismo Sharpening
From delicate single-bevel Japanese knives to hard-working trade tools. Every service is available as a call-out to your home, kitchen or workshop.
Tell me what needs sharpening and where you are. I'll confirm a date and a quote.
I set up on site with my sharpening machines and strops, so your knives never leave your sight.
Each edge is stropped, tested on paper and checked under magnification, then cleaned and returned.

Gyuto, santoku, nakiri, petty, yanagiba and deba. Single and double bevel, carbon and stainless, sharpened to the maker's geometry without rounding the shinogi line.

Chef's knives, carving knives, paring knives and the drawer full of blades that have gone dull. Western and Japanese brands welcome.

Scandi grinds kept dead flat, convex edges maintained, and field knives that can carve feather sticks and baton wood without rolling.

Boning, skinning, breaking knives and cleavers on a regular rota, so your team is never working with tired edges. Trade rates for volume.

Bench chisels, plane irons, carving gouges and spokeshave blades. Backs flattened, primary and micro bevels set, honed to a polished edge.

Scratches, rust spots and patina cleaned up. Choose a uniform satin, a misty kasumi finish on Japanese blades or a full mirror polish.

Loose wa handles reset, cracked scales stabilised, gaps filled and handles sanded and oiled. Chipped tips and broken points reprofiled at the same time if needed.
Around 90% of my work is done on specialist sharpening machines. Every knife's original angle is measured before I start, and water cooling keeps the steel safe, so you get a consistent edge with the original geometry intact.
How every blade is sharpened
Original edge angle read with a high-accuracy digital angle finder. Chips and damage checked.
Chips, broken tips and tired bevels reprofiled on the 3M belt grinder, only where needed.
Cutting edge set with a precision angle guide on the water-cooled stone wheel, or the desktop system for small and specialist blades.
Finished on leather loaded with diamond compound to remove the burr.
Checked for a clean, shaving-sharp edge before it's handed back.
Measured, not guessed
No two knives are ground the same, so I never work to a standard angle. Before sharpening, each knife's original edge angle is read with a high-accuracy digital angle finder. The cutting edge is then set on site with a precision angle guide, so your knife comes back with the geometry its maker intended.
My main sharpening machine. Japanese abrasive stone wheels running cool in water, with the angle locked to each knife's measured geometry, so the steel never overheats and the edge is even from heel to tip.
Running only the very best 3M abrasives. Used for reprofiling, chip and broken-tip repair, and restoring heavily worn or damaged blades.
A precision desktop sharpener with broad angle adjustment, for smaller knives, specialist blades and anything that needs an unusual angle.
Every edge, machine or hand sharpened, is finished on leather impregnated with diamond compound. This is what takes it from sharp to shaving sharp.
Around 10% of my work is still done by hand on Japanese whetstones. I keep them for delicate single-bevel knives, unusual blades and anyone who would like their knife sharpened the traditional way.
Priced per blade. You get a quote before any work starts, and anything unusual is talked through first.
Placeholder prices, update before launch
Restaurants, butchers and joinery workshops can book a regular sharpening rota at trade rates. Get in touch for a quote.
A look at the work. Tap any photo to see it full size.
Hand-picked kit to keep your edges keen between visits. Launching soon.
Fill in the form and I'll come back to you within one working day to confirm a time and a quote.